Polyglycolic Acid Suture Manufacturer

خيوط جراحية صناعية قابلة للامتصاص (USP) (خيوط جراحية معقمة)

Polyglycolic Acid Fast (Uniglyde Fast) is an absorbable, sterile, synthetic surgical suture composed of polymers made from 100% homopolymer of glycolide, are coated with the equal parts of Polycaprolactone and calcium stearate. It is available in Undyed. Uniglyde Fast meets all the requirements as per the United States Pharmacopeia for Synthetic Absorbable Suture.

In-house needle manufacturing provides the better needles with optimum sharpness which is finally delivers smooth riding on tissue during suturing.

PPOLYGLYCOLIC ACID SUTURE INDICATIONS

Uniglyde Fast absorbs by simple hydrolytic mechanism and absorption is predictable. It retains approximately 75% of the initial tensile strength after 3 days, 50% after 5 days, absorption is Faster and absorbs within 40-42days.

ملكيات: Smooth passage through tissue provides no trauma, High tensile strength, good knot security, easy knot replacement, reduces pain and discomfort, minimal tissue reaction and are used in short term wound support, soft tissue approximation, including use in ophthalmic procedures. It is not used for cardiovascular and neurological procedures.

عمود النينجا 1عمود النينجا 2
صفاتSynthetic Absorbable Surgical Suture (Fast Absorbable)
يكتبمضفرة ومطلية.
Coatingبولي كابرولاكتون وستيرات الكالسيوم.
مادة100% هوموبوليمر من الجليكوليد.
لونغير مصبوغ
Support7 الى 10 ايام
امتصاصAbsorption takes place through hydrolysis mechanism completely gets absorbed in 40 to 42 days
قوة الشد75% tensile strength lasts till 3 days and 50% till 5 days 6/0 ? 2
مجموعة USP6/0 ? 2
تعقيممعقم بواسطة أكسيد الإيثيلين (EO).
مدة الصلاحية3 سنوات
التغليففي عبوات من ورق الألومنيوم مع أو بدون إبرة
خصائص المنتجقوة شد ممتازة، ربط ممتاز للعقد، تفاعل نسيجي ضئيل
التغليفيتم تعبئتها في 12/24/36 قطعة في كل صندوق حسب المتطلبات.
نوع الإبرةRound bodied, cutting edge, Reverse Cutting, taper point, straight.
رقم ترخيص التصنيعصانع/مدير/2020/000109
رقم الترخيص الأصليKA/الجهاز/التصنيع/المدير التنفيذي/2020/000109

 يمكن أيضًا توفيرها بأطوال مختلفة للإبرة وحجم الخيوط اعتمادًا على المتطلبات.

الكود رقمحجم USPطولوصف الإبرة
N 2732A FAST3-045 سم3/8 Circle Reverse Cutting 26mm
N 2732 FAST3-075 cm3/8 Circle Reverse Cutting 26mm
N 2732/703-070 سم3/8 Circle Reverse Cutting 26mm
N 2735A FAST3-045 سمقطع دائرة 1/2 22 مم
N 2762 FAST2-090 سم1/2 Circle Taper Cutting 35mm
N 2762AF2-045 سم1/2 Circle Taper Cutting 35mm
N 2762F VS2-0110 سم1/2 Circle Taper Cutting 35mm
N 2762A ECO2-070 سم1/2 Circle Taper Cutting 35mm
N 2763 FAST090 سم1/2 Circle Taper Cutting 35mm
N 2763 FDA090 سم1/2 Circle Taper Cutting 35mm
N 2763A ECO070 سم1/2 Circle Taper Cutting 35mm
N 2777 FAST2-0140 سم1/2 Circle Round Body 36mm and 1/2 Circle Reverse Cutting 36mm